Modding guide

Bringing in your own meshes and animations

11 min readASA DevKit as of November 2026 (UE 5.8.1); Blender 4.x; ASE where noted

A model goes from Blender into the DevKit at the right size and facing the right way, with collision and working animations. Every "my own look" job starts here: structures, armor, weapons, saddles and creatures. The first clean import takes an evening. After that it's minutes.

  • You'll make: a static or skeletal mesh in your mod folder that imports at the right scale and works in game
  • Time: an evening the first time, then minutes per mesh
  • Level: intermediate (you know your way around Blender and the editor)
  • You'll need: a mod set up, Blender (or another 3D tool that writes FBX), and the vanilla asset your mesh replaces

Making a creature? Use this page for export and import, then How to make a creature from scratch.

Static or skeletal?

Pick the mesh type first. It decides your export, your import and how the mesh moves.

  • A static mesh is one rigid shape with no bones. Use it for structures, props, shields and simple hats.
  • A skeletal mesh is skinned to bones, so it bends. Use it for creatures, armor, saddles and animated weapons.

If the thing never bends, use a static mesh. It's cheaper, it takes Nanite, and it's far easier to get right. A simple hat sits on the head socket as a static mesh. Only clothing that drapes over several bones needs skinning.

The process

  1. Model at real size, in centimeters. Unreal measures in centimeters and Blender in meters. Fix it once in your Blender scene.

    Show me how
    • Pick one of these, never both:
      • Scene → Units → Unit Scale 0.01, with Length in centimeters. One Blender unit is then one Unreal centimeter. Wildcard's own workshop series uses this (Watch).
      • Leave Blender in meters and set Scale in the FBX export to fit.
    • Modders report that mixing the two looks fine on the mesh but scales the animations 100 times too small.
    • Size against vanilla. Export the vanilla mesh you're replacing (right-click → Asset Actions → Export) and import it into Blender as a reference. The wooden wall's collision box is about 318 by 307 units.
    • Apply transforms before you export: select everything, Ctrl+A → All Transforms. If a skeletal mesh comes in a different size from the same model as a static mesh, check the armature's scale first.
  2. Put the origin where the game expects it. The game places, rotates and attaches the mesh by its origin. Get it wrong and the mesh floats, sinks or swings around a corner.

    Show me how
    Mesh Where the origin goes
    Structure where the vanilla piece you replace has it
    Creature on the floor, under the body, at the root bone (step 2 of the creature page)
    Hat, shield, socketed weapon at the attach point, so the socket lines up with no offset
    Armor leave it where the player body's origin is; you modeled on top of it

    In Blender: Shift+S → Cursor to World Origin, then Object → Set Origin → Origin to 3D Cursor.

  3. Rig to an ARK skeleton if you can. Skin your armor, saddle or creature to an existing ARK skeleton. Its animations then play on your mesh with no retargeting.

    Show me how
    • Export the vanilla skeletal mesh (player body, creature, saddle) from the DevKit and import it into Blender. Model on top of it, then weight-paint to its bones.
    • Don't rename, add or reorder bones. If the bone tree differs, the import fails with "Failed to merge bones".
    • Blender and Unreal orient bones differently. Re-importing your own export into Blender can re-orient them, and then the export back is corrupt. Modders keep a "game" copy of the rig untouched and do their editing on a second copy.
    • A new creature rig: How to make a creature from scratch, step 2, covers the root bone, its name and Blender's extra root.
  4. Export an FBX with the settings Unreal wants. Select what you're exporting, then use File → Export → FBX. Two settings matter more than the rest: Selected Objects, and Add Leaf Bones off.

    Show me how
    Setting Static mesh Skeletal mesh
    Limit to Selected Objects Selected Objects
    Selection the mesh and its UCX_ collision pieces the armature and every mesh skinned to it
    Object Types Mesh Armature, Mesh
    Scale 1.0 when the scene's Unit Scale is 0.01 the same
    Forward / Up the defaults the defaults
    Smoothing Face Face
    Armature: Add Leaf Bones n/a off
    Bake Animation off for the mesh file on for animation files
    • Selecting only the armature exports no mesh at all. Select the armature and its meshes (or press A).
    • Leaf bones are extra bones Blender adds at each chain's end. They break the match with an ARK skeleton.
    • If it comes in turned, rotate it in Blender and apply the rotation. That's easier to reason about than the axis settings.
    • Export add-ons: Many creature modders use a Blender add-on that writes Unreal-ready FBX and fixes bone orientation. I haven't compared them; the plain exporter with these settings works.
  5. Import into your mod folder with the right options. Drag the FBX into a folder inside your mod. The import dialog decides the skeleton and Nanite.

    Show me how

    Static mesh:

    • Leave Skeletal Mesh unticked.
    • Build Nanite: on for solid, opaque meshes. Every vanilla structure mesh I checked has Nanite on (the wooden, metal and Tek walls and the small storage box). Step 7 has the catch.
    • Generate Missing Collision: on, unless you exported UCX_ pieces (step 6).
    • Import Mesh LODs: on only if your FBX has LOD groups.
    • Combine Meshes: on, so one FBX becomes one mesh.

    Skeletal mesh:

    • Tick Skeletal Mesh.
    • Skeleton: pick the ARK skeleton you rigged to (step 3), such as the player's Human_Male_TPV_Skeleton. Leave it empty only for a brand-new skeleton.
    • Create Physics Asset: on for creatures. Armor doesn't need one; it rides the body's.
    • Import Morph Targets: on if you made shape keys.
    • Import Animations: off for the mesh; import animations separately against the skeleton (step 8).

    Both: set Material Import Method to not create materials. You'll assign your own material instance (Materials, textures and dye regions). Keep everything you import inside your mod folder.

  6. Give static meshes simple collision. Without collision shapes, players walk through it. Add shapes in Blender or in the mesh editor.

    Show me how
    • In Blender: model a few low-poly convex shapes and name each UCX_<YourMeshName>_01, _02. The importer turns them into collision and hides them.
    • In the mesh editor: Collision → Add Box Simplified Collision (or Sphere, Capsule), or Auto Convex Collision with a higher hull count for odd shapes. The vanilla wooden wall uses one box.
    • For shapes players walk inside (arches, caves, open doorways): set Collision Complexity to Use Complex Collision As Simple. Auto convex fills the opening; complex collision follows the triangles. It turns every render triangle into collision, so keep it for low-poly meshes. On a detailed mesh, build the collision from several simple UCX_ pieces in your FBX instead (an Unreal Fest talk). Alt+C in the viewport shows collision.
    • Then check the component's Collision Presets in your Blueprint aren't NoCollision.
    • Skeletal meshes collide through their physics asset instead.
  7. Check Nanite and LODs. Nanite draws one detailed mesh well at any distance. Meshes without it need LODs: lower-detail copies the game swaps in as you walk away.

    Show me how
    • Nanite works on static meshes. Turn it on or off in the mesh editor (Nanite Settings → Enable Nanite Support) or for many meshes at once from the content browser's right-click Nanite menu.
    • The material must allow it. Modders found ARK falls back to the mesh's non-Nanite version when a material isn't marked Used with Nanite, and logs "Invalid usage flag on material … for Nanite static mesh". Nanite takes only opaque and masked materials: translucent and post process materials never work with it.
    • Leaves fade out at a distance on Nanite foliage: tick Preserve Area in the Nanite settings.
    • Skeletal meshes: give them LODs. Import them from your FBX, or generate them in the mesh editor's LOD Settings.
  8. Import or retarget the animations. Animations made on the same skeleton import straight onto it. Animations from another skeleton need retargeting.

    Show me how
    • Same skeleton: import the FBX, untick Import Mesh, and pick the skeleton. Keep the root's rotation the same as the mesh's, or the body turns 90 degrees when the animation plays.
    • Another skeleton: make an IK Rig for each skeleton, with matching chain names (spine, left arm, and so on). Then make an IK Retargeter between them, and use Duplicate and Retarget Animation Assets. Modders find poses retarget well and hand contacts less well.
    • Onto the player: the kit already has IK Rigs for the male player, such as IKRig_Human_Male_TPV in /Game/PrimalEarth/Human/Male/MetaHuman/IKRigs/. Use it as your target instead of building one.
    • Vanilla animations: don't duplicate them to use them. Reference the vanilla assets; copies bloat your mod.
  9. Add the sockets things attach to. A socket is a named point on a bone or mesh. Riders, weapons, hats and effects attach to sockets.

    Show me how
    • On a skeleton: open it, right-click a bone → Add Socket, and name it exactly as the game expects. The rider socket and the bite sockets are in the creature page, step 4.
    • On a static mesh: use the mesh editor's Socket Manager. Handy for a muzzle point or an effect.
    • Player hand and body sockets are fixed: weapons use the player's attach sockets (How to make a weapon); shields use ShieldAttach (How to make armor).
  10. Put it on your Blueprint and test it in game. Swap the mesh on the inherited component. Don't delete the component. Test in PIE, then in a cooked build: meshes break in the cook more than anywhere else.

    Show me how
    You're making Where the mesh goes
    Structure My Static Mesh component (structure step 4)
    Armor an entry per body in Actor Class Attachment Infos (armor step 4)
    Weapon Mesh1P and Mesh3P, or a static mesh on their socket (weapon step 9)
    Creature the mesh component's Skeletal Mesh (creature from scratch, step 7)

    To kit-bash without Blender, add vanilla meshes as extra components. Or place them in a level, select them, and use Actor → Convert Actors to Static Mesh to save one new mesh into your mod.

The settings that matter

Setting Where
Unit Scale 0.01 Blender scene
Add Leaf Bones off FBX export
Skeleton import dialog
Collision Complexity mesh editor
Enable Nanite Support mesh editor
Used with Nanite material
Add Socket skeleton

Common mistakes

It's huge or tiny

The scale was set twice or not at all. Use either Unit Scale 0.01 or the FBX export scale, apply all transforms, and export again (step 1). If only the skeletal version is wrong, apply the scale on the armature too.

It's rotated 90 degrees

The model faces a different axis from the vanilla mesh. Vanilla creature meshes face along Unreal's Y axis, and the creature's mesh component turns them −90 degrees. Rotate the component, or rotate and apply in Blender (step 4). If it only turns while an animation plays, the animation's root rotation differs from the mesh's (step 8).

It's invisible in game, but fine in the kit

Check three things, in order. Is the mesh or its material outside your mod folder? Then it wasn't cooked (References outside your mod). Does the material lack a usage flag, such as Used with Nanite (step 7)? Is it armor with no entry for that body type (armor)?

Players walk through it

The static mesh has no simple collision, or the component's preset is NoCollision. Add shapes or UCX_ pieces (step 6). For hollow shapes, use complex collision as simple.

"Failed to merge bones" on import

The FBX's bone tree doesn't match the skeleton you picked. Leaf bones and Blender's extra root bone are the usual cause; turn them off and export again (step 4). The creature page has more.

The animation explodes or stretches

The animation was made on a skeleton with different bones, proportions or bone orientation. Import it against the skeleton it was made on, then retarget with an IK Retargeter (step 8). A rig whose bones Blender re-oriented on import is the classic cause (step 3).

It's a solid color, or textures sit in the wrong place

The mesh has no UVs, or the material reads the wrong UV channel. Unwrap UV channel 0 for your textures. Vanilla structure materials also read maps whose names end in UV2 from a second channel. Give your mesh one, or use another parent (Materials, textures and dye regions).

Check it worked

  1. Size and facing: next to the vanilla piece it replaces, it matches and faces the same way.
  2. Collision: with Show → Collision on, you can stand on it and walk through openings.
  3. Animations: each previews with no twist, stretch or 90-degree turn.
  4. Distance: walk away in PIE. It doesn't pop or vanish.
  5. A cooked build or a local dedicated server (Testing your mod): it's visible, solid and textured. Search the client log for your mesh's name (Reading ARK's logs).

Watch

Go deeper

Sources

  • DevKit files, read offline on 2026-11-06 (UE 5.8.1): SM_Wood_WallSquare (size, one box collision, Nanite on, Build Nanite in its import data, lightmap on UV channel 1); the meshes of Wall_Metal, Wall_Tek and StorageBox_Small (Nanite on); Rex_New (skeleton, physics asset, LOD streaming settings); the Rex's animations (skeleton, sound notifies); Human_Male_TPV (its skeleton); the IK Rigs and retargeters in /Game/PrimalEarth/Human/Male/MetaHuman/IKRigs/.
  • My other pages: How to make a creature from scratch (root bone, mesh offset, sockets), How to make a weapon (locked parent sockets since UE 5.5), How to make armor (player mesh export).
  • What modders report, from the ARK Modding Community Discord: export selection and default import options (December 2023); scale set twice and animations 100 times too small (October 2024); a giant hat and static meshes for hats (June 2024); scaling to match a vanilla piece in Blender (March 2024); a skeletal mesh importing at the wrong size while the static version is right (August 2026, unresolved); bone orientation between Blender and the kit (May 2024); retargeting with IK Rigs and the 90-degree turn (November 2023 to April 2025); Nanite usage flags and the fallback mesh (June 2024), Preserve Area for foliage (August 2024), the Nanite menu (June 2025); collision from auto convex, UCX_ pieces and complex-as-simple (August 2024 to June 2025); no UVs, flat color (April 2024).
  • Videos listed under Watch: creators' tutorials, not checked against the kit.
  • Community knowledge from the ARK Modding Community Discord (discussions from November 2023 to August 2026, mainly #asa-general, #asa-animation, #asa-materials, #asa-mapping, #asa-fx-and-media and #2d-and-3d-art), found with Overseer. Threads that helped (they open for server members): scale and animations (October 2024), static hats and a giant beanie (June 2024), bone orientation (May 2024), re-rig or retarget (November 2023), Nanite usage flag (June 2024), collision settings for imported meshes (August 2024).
Where this page's information comes from

Applies to: ASA DevKit as of November 2026 (UE 5.8.1); Blender 4.x; ASE where noted

the DevKit's own meshes, skeletons and animations, the community Discord and creators' videos (see Sources)

Esc

↑ ↓ move↵ openCtrl ↵ new tab