How to make a creature from scratch
14 min readASA DevKit as of November 2026 (UE 5.8.1); ASE where noted
Your own creature goes from a rigged model to a tameable, rideable animal in the world. These steps expand Part 2 of How to make a custom creature, step by step. It's the biggest gap on the community Discord, so I built it from the kit's own Dodo, Raptor and Rex. Expect weeks the first time, most of it on animation.
- You'll make: a new creature with its own mesh, skeleton, physics asset, animation Blueprint, stats and AI
- Time: a weekend for a moving, fighting creature; weeks for full animation, death and saddle work
- Level: experienced (you've made a creature variant and know your 3D tool)
- You'll need: a mod set up and registered, a rigged and animated model, and the vanilla creature closest to yours
Before you start:
- Make a variant first (Part 1 of How to make a custom creature). Every setting there applies here.
- Pick a reference creature with your body plan. You'll copy its setup at every step. Step 1 suggests five.
- For Blender export and import settings, read Bringing in your own meshes and animations.
How a creature hangs together
Five assets point at each other. Get the chain right and ARK's C++ code does most of the work.
- The skeleton holds bones, sockets and animation slots.
- The skeletal mesh is the body. It names the skeleton and a physics asset, the collision bodies used for ragdoll and hits.
- The animation Blueprint blends poses. Its parent is one of the kit's
DinoBlueprintBaseclasses. - The character Blueprint holds the capsule, settings, attacks and taming. It names the mesh, the animation Blueprint and the AI controller, and carries the status component with the stats.
The process
Plan from your reference creature. Open its character Blueprint, skeleton, mesh and animation Blueprint side by side. You'll match its names and numbers rather than invent them.
Show me how
Body plan Copy from Its animation Blueprint's parent Capsule radius × half height small walker Dodo_Character_BPDinoBlueprintBase_RootBoneName36 × 55 biped hunter Raptor_Character_BP(onDino_Character_BP_Pack)DinoBlueprintBase50 × 100 big biped Rex_Character_BPDinoBlueprintBase215 × 270 flyer Ptero_Character_BPDinoBlueprintBase_RootTransform80 × 100 swimmer Megalodon_Character_BPDinoBlueprintBase_RootTransform220 × 220 All five are children of
Dino_Character_BP. Their stats and foods: Dodo, Raptor, Rex, Pteranodon, Megalodon.Rig the model with one clean root bone at the origin. Build it at real size in centimeters. Keep the root at floor level under the body, with nothing above it in the hierarchy.
Show me how
- Name the root to suit the animation base you'll use (step 6).
DinoBlueprintBase_RootBoneNameandDinoBlueprintBase_RootTransformmove a bone calledroot.DinoBlueprintBasemovesROOT_JNT_SKL. The Dodo's root isroot; the Rex's isROOT_JNT_SKL. - Scale: Unreal works in centimeters, Blender in meters by default. Modders set either the scene's unit scale to 0.01 or the FBX export scale, never both.
- Blender's extra root: Blender adds the armature object as a bone above your root. Remove it, and untick Add Leaf Bones on export. Both cause "Failed to merge bones" later.
- Bone roll: Blender and Unreal orient bones differently. Don't let Blender re-orient bones on import. Many creature modders use an Unreal export add-on for Blender to avoid this.
- Cheapest route: rig your model to an existing ARK skeleton. Its animations then play with no retargeting (How to make a custom creature, step 1 of Part 2).
- Name legs, spine, neck, head and jaw clearly; you'll type those names into the creature (step 4). The Rex has 88 bones.
- Name the root to suit the animation base you'll use (step 6).
Import the skeletal mesh and make its physics asset. Import it as a skeletal mesh with a new skeleton, unless you rigged to an existing one. Then generate a physics asset and set it on the mesh.
Show me how
- Import into your mod folder. Pick the existing skeleton only if the bone hierarchy matches it exactly.
- Import animations with the same root rotation as the mesh. Otherwise the body turns 90 degrees when one plays.
- Right-click the mesh → Create → Physics Asset. Check its Physics Asset field on the mesh points at it.
- Keep it simple: the Dodo uses 14 bodies and the Rex 28, on spine, neck, head, jaw, legs and tail. Neither puts a body on the root.
- Press Simulate in the physics asset editor. Fix any limb that folds through the body with its constraint limits.
- The Rex's mesh also has an optional post-process animation Blueprint,
Rex_PPAnimBP.
Set up the skeleton: slot groups, sockets and the bones the game names. ARK plays montages in fixed slots and attaches riders, hits and effects to sockets. Copy your reference creature's set.
Show me how
Slot groups: All three reference skeletons have these six. Add them in the skeleton's Anim Slot Manager:
Group Slot What plays there (Rex) DefaultGroup DefaultSlot general use FullBodyGroup FullBodySlot full-body montages, such as falling asleep ( Rex-Torpid-In_Montage)AdditiveGroup AdditiveSlot attacks ( Rex-Bite2_Montage)AdditiveGroupSecondary AdditiveSlotSecondary hurt reactions ( Rex-Hurt-Big-Lft_Montage)DeathGroup DeathSlot death poses TorpidEatGroup TorpidEatSlot eating while knocked out Sockets the Rex's skeleton uses, with the bone each sits on:
Socket Rex bone Used for RiderSocketCnt_Spine_003_JNT_SKLwhere the rider sits MeleeSocket1to4Cnt_Jaw_JNT_SKLthe bite's hit trace DragSocketCnt_Jaw_JNT_SKLwhat it carries in its mouth HeadSocket,LookOffsetSocket,PoopSockethead, root, spine roar overlap, aim, poop LB_Foot_VFX,RB_Foot_VFXfeet footstep effects buffsocketcenterdynamic,BuffSocketHeadDynamic, hat socketsspine, head buff effects, event hats Bones and sockets the creature names: These fields on the character hold bone or socket names. Each must match your skeleton exactly:
Field Rex value Melee Swing Sockets (on each attack too) MeleeSocket1to4Drag Bone Name, Drag Socket Name cnt_jaw_jnt_skl,DragSocketRider Socket Name not set, so the class default; the rider uses RiderSocketStep Damage Foot Damage Sockets both foot IK bones Roar Overlap Socket HeadSocketBone Damage Adjusters neck, head and jaw at 1.5× damage IK Legs, on the mesh component each leg's top bone and foot bone (step 9) I haven't confirmed which socket names the C++ code looks up without a field. Copy the vanilla set and you're covered.
Make the animations and their montages. Idle, walk and run are animation sequences. Everything the creature plays on demand is a montage in the right slot.
Show me how
The character's fields list what it needs. For each, make a montage from your sequence and set its slot (step 4):
- attacks: one montage per Attack Infos entry, in AdditiveSlot;
- Hurt Anim, in AdditiveSlotSecondary;
- Fall Asleep Anim, Wild Unsleep Anim, Tamed Unsleep Anim, in FullBodySlot;
- Sleep Consume Food Anim, in TorpidEatSlot;
- Waking Consume Food Anim, Poop Animation, Baby Cuddled Animation;
- Death Animations: a map with five keys,
Swimming,Falling,Sleeping,WalkingIdleandWalking. Vanilla fills each with a death blend space, such as the Rex'sIdle_Death_BlendSpace(step 9).
A blink or breathing loop must be additive. Modders traced a stuck T-pose to a blink that wasn't. In its asset details, set Additive Anim Type to Local Space and the base pose to a frame of your idle.
To reuse animations made for another skeleton, use an IK Rig for each skeleton, an IK Retargeter, then Duplicate and Retarget Animation Assets.
Make the animation Blueprint as a child of a
DinoBlueprintBaseclass. Pick the base your reference creature uses. The base already reads the creature's state each frame; you fill in the animations.Show me how
- Create it on your skeleton with the base as parent, or reparent it later (File → Reparent Blueprint).
The bases live in
/Game/PrimalEarth/CoreBlueprints/BaseAnimBlueprints/. - Which base: In the vanilla creature folders, 56 animation Blueprints use
DinoBlueprintBase_RootBoneName, 17 useDinoBlueprintBase_RootTransform(most flyers and many swimmers), and only the Rex and Raptor use plainDinoBlueprintBase. There are swimmer, climber, ramming, strafe and ground-and-flying versions too. - Match the root bone. Each base has a Modify Bone node wired to one bone name (step 2). If it doesn't match your root, the body won't follow the ground offsets the code applies.
- The C++ fills a few values that drive it: the root offset, the movement rate and whether it's moving. The base's own graph reads the rest from the creature: Is Moving, Is Running, Is Swimming, Is Falling, Is Sleeping, Is Dead, Is Turning and Is Baby. Don't set these yourself.
- Swap in your animations. A child can't edit the base's graph. Open Window → Asset Override Editor and replace each of the base's idle, walk, run, turn, fall, swim and sleep assets with yours. The Dodo's and Rex's animation Blueprints are nothing but these overrides.
- Set the switches in Class Defaults: Use Running, Use Swimming, Use Falling, Use Sleeping Anim and Use Turning turn parts of the base on. Speed tuning lives there too: Max Movement Anim Rate and Movement Anim Rate Power.
- Modders report some DLC animation Blueprints crash the editor when opened.
DinoBlueprintBase_RootBoneNameis the safe one to read.
- Create it on your skeleton with the base as parent, or reparent it later (File → Reparent Blueprint).
The bases live in
Make the character Blueprint. Make it a child of
Dino_Character_BP, or of a specialized base. Then set its mesh, animation class, capsule and mesh offset.Show me how
- Parent:
Dino_Character_BPfor most._Packadds pack buffs,_Ramminga charge,_DivingFlyerdives. A vanilla species as parent brings all its logic along. - Mesh component (
CharacterMesh0): set Skeletal Mesh and Anim Class. - Capsule (
CollisionCylinder): size it to the body's footprint and height. It's what collides with the world. - Mesh offset: Vanilla sets the mesh's Z location to minus the capsule half height, so the feet touch the capsule's bottom. Its yaw is −90, because meshes face along Unreal's Y axis. The Dodo: capsule half height 55, mesh Z −53.5. The Rex: 270 and −269.8, plus 77 forward on X.
- Collision presets: Keep your reference creature's. Modders found a creature with changed presets had no collision at all on a dedicated server.
- Name it: Descriptive Name and Dino Name Tag. The tag links the saddle (step 11).
- Parent:
Add a status component and fill its stats. A child of
Dino_Character_BPhas no stats until you do.Show me how
Add Component → a child of
DinoCharacterStatusComponent_BP, or of your reference creature's. Fill the 12 stat slots: the 12 stats, with the Rex. Modders report a creature without one won't spawn. If you start from a species with its own component, mind the priority rule (Which component wins).Set up movement, IK and ground conform. Speeds go on the movement component. Water and air need both a switch on the creature and a matching animation base.
Show me how
Creature Settings Walker movement component: Max Walk Speed (Dodo 65, Raptor 480, Rex 515), Rotation Rate, Max Step Height; creature: Running Speed Modifier Flyer creature: Is Flyer Dino (Pteranodon); movement: Default Water Movement Mode Flying; animation base _RootTransformSwimmer creature: Is Water Dino, Die If Left Water (Megalodon); movement: Max Swim Speed, Default Land and Water Movement Mode both Flying, as on the Megalodon Amphibian Is Amphibious, and a swimmer animation base The rest are in Movement: walk, swim and fly. A water creature's default movement mode must suit its animation Blueprint. Modders traced a creature that froze when ridden to a mismatch there.
Leg IK plants the feet on slopes. The Rex turns on Enable IK and lists two IK Legs on its mesh component. Each entry has a top bone (
Rht_Leg_001Linear000_JNT_SKL), a foot bone (Rht_Leg_AIk004_JNT_SKL) and a feet offset of 20. Root Pitch Rotation Limit (35) and Root Roll Rotation Limit (9) cap the body's tilt. The Dodo leaves IK off. Leave it off until the creature walks right, then add it.Ground conform is Wildcard's control-rig system for limbs that follow the ground: dragged, sleeping and dead bodies. Vanilla deaths aren't live ragdolls but death blend spaces recorded from ragdolls, played in DeathSlot. Wildcard's Setting up ground conform walks through it: a control rig copied from the Trike's, a linked graph tagged
GroundConform, and anEnableGroundConformingcurve on the torpid animations. Its Ragdoll Capture BP page records the death poses. The quick alternative is Death Use Ragdoll with your physics asset.Add attacks and an AI controller. Give it Attack Infos entries and a child of a vanilla AI controller. How to change creature behavior and AI covers both.
Show me how
- Copy your reference creature's Attack Infos entry, then swap in your montage and Melee Swing Sockets.
- Each attack montage needs a MeleeSwing notify state over the hitting frames, set to trigger on the dedicated server. Otherwise it does no damage there (AI step 6).
- Make a child of your reference creature's controller, or
Dino_AIController_BP. Set AI Controller Class. - Scale Attack Range and Attack Destination Offset with the capsule. The Rex's are 1,200 and 850.
Add taming, a saddle, breeding and colors. These work exactly as on a variant.
Show me how
- Taming: affinity, foods and knockout (How taming works).
- Saddle: its owner tag must match your Dino Name Tag, and the rider sits on
RiderSocket(How to make a saddle). A creator adds a rider socket on a skeleton in Episode 24, 3:22. - Breeding: eggs or live birth, set in Class Defaults (How to make your creature breed).
- Colors: a color set, plus your mesh's colorization mask (Materials, textures and dye regions).
- Death drops: Death Inventory Templates and Death Harvesting Component (Death and loot).
Add it to spawns. Use the Mod Data Asset, never the map's spawn tables. How to add creatures to spawns has the three routes. For admin-spawn only, list it in Extra Resources so it gets cooked.
Test it in PIE, then on a dedicated server. Follow Check it worked in order. Each step rules out the one before.
How the pieces connect
| This asset | Field | Points at |
|---|---|---|
| Skeletal mesh | Skeleton, Physics Asset | your skeleton and physics asset |
| Animation Blueprint | parent class | a DinoBlueprintBase class whose Modify Bone node matches your root |
| Character | Mesh component → Skeletal Mesh, Anim Class | your mesh and animation Blueprint |
| Character | Attack Infos → Attack Animations, Melee Swing Sockets | your montages; sockets on your skeleton |
| Montages | slot | a slot group on your skeleton |
| Saddle item | owner tags | your Dino Name Tag |
The rest of the links are the same as on a variant.
The settings that matter
| What you're looking for | Setting | Where |
|---|---|---|
| Body size | Capsule Radius, Capsule Half Height | capsule |
| Feet on the ground | Location Z = minus half height, Yaw −90 | mesh component |
| Ragdoll | Physics Asset; Death Use Ragdoll | skeletal mesh; creature |
| Speed | Max Walk Speed, Max Swim Speed, Max Fly Speed | movement component |
| Flyer, swimmer | Is Flyer Dino, Is Water Dino, Default Movement Modes | creature; movement component |
| Slope IK | Enable IK, IK Legs, Root Pitch and Roll Rotation Limits | creature; mesh component |
Bone names live in several more fields; step 4 lists them.
Common mistakes
It T-poses in game
The animation Blueprint isn't playing. Check the mesh component's Anim Class, and that the Blueprint compiles without errors. A blink or other loop that isn't set up as additive also causes it (step 5). If you copied animations from another creature, reassign them in the Asset Override Editor (step 6).
It slides along the ground, or its legs run too fast
The animation rate doesn't fit the speed. Tune the base's movement anim rate settings against Max Walk Speed (step 6). Check the speed modifiers on the creature too. If it slides while turning, lower the movement component's Rotation Rate.
It floats, sinks, or falls through the floor
The mesh offset doesn't match the capsule. Set the mesh's Z to minus the capsule half height (step 7). Turn on the capsule's visibility in PIE to see where it really is. If it falls through on a server only, check you didn't change the collision presets.
It ragdolls wrong on death, or freezes in its last pose
The skeleton needs the DeathGroup with DeathSlot, or nothing plays on death (step 4). For death poses, fill all five Death Animations keys (step 5). For a live ragdoll, turn on Death Use Ragdoll and simulate the physics asset to check its bodies and constraints (step 3).
The body tilts or leans on slopes
Leg IK is fighting a mismatched capsule or wrong bone names. Turn IK off and check it walks level. Then fix the IK Legs bone names and lower the root rotation limits (step 9).
"Failed to merge bones" on import
The FBX's bone tree differs from the skeleton you picked. Blender's extra root bone and leaf bones are the usual cause; remove them and export again (step 2). Only let the kit regenerate the skeleton if it's your own skeleton.
It won't spawn
It has no status component, or its stats are empty (step 8). Check its Anim Class too.
Check it worked
- Mesh: each animation previews with no twist or 90-degree turn.
- Physics asset: Simulate drops it into a sensible heap.
- PIE spawn: it stands on the ground and walks and runs with planted feet.
- Stats: its inventory shows your status component's numbers.
- Attacks: it targets and hits, and damage numbers appear.
- Knock it out: it sleeps, eats and tames. Ride it, and check the seat and camera.
- Kill it from idle, walking, falling, swimming and asleep. Each death looks right, and the corpse harvests.
- Water and slopes: it swims or drowns as meant, and climbs hills without tilting.
- A local dedicated server with a separate client: repeat 3 to 8 (Testing your mod). Melee damage, collision and ragdoll change most often. Check the server log for your class name (Reading ARK's logs).
Watch
No video covers the whole pipeline for ASA. These cover pieces of it:
- UPDATE: How to make your own custom DINO | Episode 13 (SlayerXtreme). 15:45 giving a creature another skeletal mesh.
- HOW TO turn an UNRIDEABLE Dino into a RIDEABLE Dino | Episode 24 (SlayerXtreme). 3:22 adding a rider socket to a skeleton. 7:21 the rider camera.
- Creating your very FIRST DINO with a TWIST | Episode 3 (SlayerXtreme). 25:19 changing how a creature looks.
Go deeper
- Creatures, Creature stats and Creature AI: every setting with vanilla values.
- Wildcard's Setting up ground conform, for limbs that follow the ground and recorded death poses.
- Symptom index for anything not listed here.
Sources
- DevKit files, read offline on 2026-11-06 (UE 5.8.1): The Dodo, Raptor, Rex, Pteranodon and Megalodon
character Blueprints (capsules, mesh offsets, collision presets, movement components, IK legs, bone and socket
fields, Death Animations keys);
Dodo_Skeleton,Raptor_SkeletonandRex_Skeleton(bone counts, sockets, slot groups, theEnableGroundConformingcurve);Rex_Newand the Dodo mesh (skeleton, physics asset, post-process animation Blueprint);Dodo_PhysicsAssetandRex_PhysicsAsset(body counts); the Rex's bite, torpid and hurt montages (slots); the 49DinoBlueprintBase*classes in/Game/PrimalEarth/CoreBlueprints/BaseAnimBlueprints/(parents, Modify Bone targets, slot nodes, state variables); and a count of the animation Blueprints under/Game/PrimalEarth/Dinos/by base. The nativePrimalDinoAnimInstancemembers come from the game DLL's reflection data. - Wildcard's DevKit documentation: Setting up ground conform (read 2026-11-06), on the control rig, linked graph, torpid curve, death map and the Ragdoll Capture BP page.
- My other pages: How to make a custom creature (Part 2 outline), lessons §8 (MeleeSwing notifies on dedicated servers).
- What modders report, from the ARK Modding Community Discord: T-poses fixed by reassigning animations or making a blink additive (2023–2024); fast walk cycles and sliding turns (2024–2025); a frozen mount and its movement modes (June 2026); capsules, IK leg length and IK tilt (2024–2025); death slots for ragdoll (2025–2026); Blender's extra root, leaf bones, scale and bone roll, and "Failed to merge bones" (2024–2026); collision presets on dedicated servers (December 2025); no status component, no spawn (February 2024); DLC animation Blueprints that crash the editor (2024–2026).
- Videos listed under Watch: creators' tutorials, not checked against the kit.
- Community knowledge from the ARK Modding Community Discord (discussions from December 2023 to October 2026, mainly #asa-general, #asa-animation, #asa-blueprints and #asa-graphs), found with Overseer. Threads that helped (they open for server members): T-pose after assigning a mesh (April 2024), additive blink settings (December 2023), movement mode and a frozen mount (June 2026), death slot and DeathGroup (May 2026), extra root and leaf bones from Blender (October 2024), "Failed to merge bones" (October 2026), collision presets on a dedicated server (December 2025).
Where this page's information comes from
Applies to: ASA DevKit as of November 2026 (UE 5.8.1); ASE where noted
the DevKit's own creatures, skeletons and animation Blueprints, Wildcard's DevKit documentation, the community Discord and creators' videos (see Sources)